DESCRIPTION

TECHNICAL SPECIFICATIONS

  • 6-input and 8-output digital signal processor.

  • 32Bit 48Khz

  • 6 input channels, 8 output channels

  • Time-Delay with 0.02 msec steps, insertion in cm, or msec.

  • All settings are in real-time

  • USB connector for adjustments via PC

  • Low-Level or High-Level input with Auto-Sense (only in High-Level)

  • Aux input with Auto-Fading for stereo signal, speakerphone and navigation

  • 8 presets

  • Mixer matrix to mix and match input / output channels at will

  • SUM function (input) for active OEM systems / sources

  • Operating voltage 9 - 15 Volts (max. 5 sec. Down to 6 Volts)

  • Optional accessories: Bluetooth, DRC controller.

      SPECIFICHE TECNICHE:

  • INPUT MODE: Low Level (LL) / High Level (HL)

  • INPUT IMPEDANCE: > 22Kohm (LL) / 10Kohm (HL)

  • INPUT SENSITIVITY: RCA / Cinch 400mv 1 x COXA  Highlevel 2 - 15 Volts 

  • MAX OUTPUT SIGNAL: 4Vrms

  • THD DISTORTION: <0.002% @ 1Vrms

  • FREQUENCY RESPONSE: 20Hz ÷ 22KHz (within -0.3dB)

  • CHANNEL SEPARATION: >88dB (@ 1KHz)

  • SUPPLY VOLTAGE: 9V ÷ 15V

  • CURRENT CONSUMPTION: 0.4A @ 12V

  • GROUND ISOLATION vs CAR BODY: 1Kohm

  • AUTOSENSE: two operative modes (yes, HL only)

  • REMOTE OUTPUT: 50mA max.

  • COMMUNICATION PERIPHERALS: Bluethooth, Remote controller

  • OPTICAL BOARD: S/PDIF

  • SIZE: 197 x 120 x 39 mm (including fixing feet)

GRAPHIC INTERFACE

The powerful software (downloadable at the bottom of the page) allows you to set all the functions of the DSP in a single page with simplicity and intuitiveness, so that it can also be used by the less experienced. Ability to use in offline mode, so you can create a configuration and insert it into the DSP at any time.

CONNECTIVITY BLUETOOTH, FOR PLAY MUSIC, FOR ANDROID AND IOS

REMOTE CONTROLLER  per DSP6-8, DSP6V2

 External display / controller for presets and main controls.
MANAGE:
- Subwoofer
- Presets
- Mute
- Volume
Easy to install
Size: 72Lx35Px20H